Run Your Car on Water to Save 50% of Fuel Cost

With the rising fuel price, finding replacement for fuel to run your car is getting crucial! When I was introduced with the "Water Car Conversion Kit" to allow you to run your car on water, I am quite skeptical about it and believe that "run you car on water" is totally scam. No before I tried it out!

You will learn how to run your car on water and double your gas mileage by installed your own car kit. This "Water Car Conversion Kit" will allow you to run your car on water together with gas, but the same amount of gas can last a lot longer, usually twice as long and you can save 50% of fuel cost by running your car on water.

Some materials required to build your "Water Car Conversion Kit" to run your car on water included:
• Plastic water tank with pump and level sensor.
• Control circuit, wiring, connectors, and epoxy.
• Reaction chamber with electrodes and fittings.
• 3/8″ stainless steel flex-tubing, fittings and clamps.

You can get these materials less than $50 and you can be found at your local hardware and auto-part stores easily

Here is the suggested sequence of steps to install the car water kit to run your car on water:
1. Install the CHT/EGT gauge and measure your current operating temperature range.
2. Build and test the controller and reaction chamber to verify the correct pulse output.
3. Install the tank, controller, chamber, and pressure fittings into your car.
4. Start your car engine and adjust the control circuit as required.
5. Install the stainless steel valves and get the pistons/cylinders coated with ceramic.

It take you only few hours to build the "Water Car Conversion Kit" with the detailed Water Powered Car Guide. Do it today to run your car on water and save 50% of fuel cost!

Labels: Water Powered Car Facts